Bosch DS7445i Podręcznik Użytkownika Strona 44
- Strona / 54
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Page 44 P/N: 49211C © 2002 Detection Systems, Inc. All rights reserved. DS7240/DS7220 User's Guide
PART II: KEYPAD USER’S GUIDE: DS7445i LED KEYPAD
5.29 Extend Auto On Time
I can perform this function.
I cannot perform this function.
Key Sequence: [#] + [5] + [1]
Description
Your Security Company can program your system to
turn on automatically. Use this function to delay the
Auto-On time by one hour during the Auto-On Pre-
Alert time.
Procedure
1. Make sure that the system is turned off (Armed
LED is off).
2. Enter a valid user PIN.
3. Enter [#] + [5] + [1].
The keypad sounds a valid tone when the Auto-
On time adjustment is made. The keypad then
automatically exits this function.
5.30 All Areas On
I can perform this function.
I cannot perform this function.
Key Sequence: [#] + [8] + [0]
Description
Depending on the areas assigned to your authority
level, this function turns on all areas at the same time
when the system is split into more than one area.
Procedure
1. Enter a valid user PIN.
2. Enter [#] + [8] + [0].
If your PIN is valid, the Armed LED turns on and
Exit Delay begins.
• If an alarm occurs when you try to turn all
areas All On, the keypad emits an alarm tone.
• If an area has a faulted zone(s) when you try
to turn all areas All On, the appropriate Zone
LED(s) turn on (Zones 1-16).
5.31 All Areas Off
I can perform this function.
I cannot perform this function.
Key Sequence: [#] + [8] + [1]
Description
Depending on the areas assigned to your authority
level, this function turns off all areas at the same time
when the system is split into more than one area.
Procedure
1. Enter a valid user PIN.
2. Enter [#] + [8] + [1].
The keypad turns off all areas at the same time.
5.32 Auto Forward On/Off
I can perform this function.
I cannot perform this function.
Key Sequence: [#] + [8] + [2]
Description
Use this function to turn the Auto-Forward feature on
or off as necessary.
Procedure
1. Enter a valid user PIN.
2. Enter [#] + [8] + [2].
The keypad sounds the OK tone.
3. Press the [1] key to turn Auto-Forward on, or
press the [2] key to turn Auto-Forward off.
• Zone 1 LED On: Auto-Forward is on (Zone 2
LED flashes).
• Zone 2 LED On: Auto-Forward is off (Zone 1
LED flashes).
4. Press the [#] key to exit this function.
- User’s Guide for the 1
- MY ALARM COMPANY IS: 2
- Contents 3
- Part I: Introduction 4
- 3.0 Keypad Overview 5
- 3.2 Keypad Tones 6
- 3.3 Keypad LED Functions 6
- 3.4 Function Key Sequences 7
- 3.5 System Events 7
- 3.8 Logging Out of the System 7
- Part II: Keypad User’s Guide 8
- 4.7 Set Partial On Zones 10
- 4.10 Force Arming the System 12
- 4.11 View Faulted Zones 13
- 4.12 Bypass Zones 13
- 4.13 Date and Time 14
- 4.14 Change PIN 14
- 4.15 Change Others’ PINs 15
- 4.17 Add a PIN 16
- 4.18 Delete a PIN 17
- 4.19 Renew One-Time PINs 17
- 4.20 Check System Troubles 18
- 4.21 View Alarm Memory 18
- 4.22 View System Trouble 19
- 4.23 View Zone Trouble 19
- 4.24 System Test 19
- 4.25 Walk Test 20
- 4.26 Reset the System 21
- 4.27 Turn Chime On/Off 21
- 4.28 Select Chime Tone 21
- 4.29 Select Chime Zones 22
- 4.30 Extend Auto-On Time 22
- 4.31 Change Skeds 22
- 4.32 Change Outputs 25
- 4.33 Remote Program 26
- 4.34 All Areas Off 26
- 4.35 All Areas On 26
- 4.36 Move to Area 27
- 4.37 Auto-Forward On Setup 27
- 4.38 Auto-Forward Off Setup 28
- 4.39 Auto-Forward On/Off 28
- 4.41 View Log 29
- 5.1 Silence Alarms 30
- 5.2 Keypad Adjust 30
- 5.3 Turn the System Off 30
- 5.4 Turn the System All On 31
- 5.7 Set Partial On Zones 32
- Flashing Armed LED 33
- 5.10 Force Arming the System 34
- 5.11 Bypass Zones 35
- 5.12 Date and Time 35
- I can perform this function 36
- 5.17 Delete a PIN 39
- 5.18 Renew One-Time PINs 39
- 5.19 Check System Troubles 40
- 5.20 View Alarm Memory 40
- 5.21 View System Trouble 40
- 5.22 View Zone Trouble 41
- 5.23 System Test 41
- 5.24 Walk Test 42
- 5.25 Reset the System 42
- 5.26 Turn Chime On/Off 42
- 5.29 Extend Auto On Time 44
- 5.30 All Areas On 44
- 5.31 All Areas Off 44
- 5.32 Auto Forward On/Off 44
- 5.34 Remote Program 45
- Part III: Reference Materials 46
- 7.0 Panel Event Descriptions 47
- 10.0 Maintenance and Service 52
- 11.0 Power Failure 52
- 12.0 How to Clean the Keypad 52
- 13.0 Glossary 53
- Detection Systems, Inc. 6/02 54
- P/N: 49211C Page 54 of 54 54
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Bosch DS7445i
(175 strony)
(44 strony)
(8 strony)
(64 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.034 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji