Bosch PIN8 N1 Dokumentacja Pobierz pdf (Strona 43)

Rexroth SYNAX 200 Motion control configuration 4-5

DOK-SYNAX*-SY*-12VRS**-PR01-EN-P

The PPC-R21.1 unit occupies one slot in the module carrier; the PPC-

R22.1 occupies two units. In this carrier system, the PPC-R unit can

handle up to 15 further I/O modules (RME02.2..., RMA02.2... or

RMC02.2...).

The firmware or parameters of the motion control are stored on the

programming module PFM01.1. The programming module PSM has PC

card format, the programming module PFM has compact flash format.

Depending on the application, the PPC-R has PC/104 modules fitted that,

for example, can be used for open fieldbus interfaces, such as Profibus,

DeviceNet, etc..

4.3 Brief description PPC-P

YG000052V01_NN.bmp

Fig. 4-6: PPC-P01.1

The PPC-P control in PCI format is directly plugged to a PCI slot of a PC.

The card supports the "plug-and-play" functionality, that means the

address range in the PC is allocated dynamically. Jumpers for setting the

address range are not necessary.

The interface that is available on the motion control is connected as per

Rexroth norm (SIS = Serial Indramat Interface). The type of data

transmission (function) is selected with the respective application

(RS232/RS422/RS485).

Diagnosis of the motion control can be read with the 7 segment display.

The firmware or parameters of the motion control are stored on the

PFM01.1 programming module. The programming module is in compact

flash format.

Depending on the application, the PPC-P has PC104 modules fitted that,

for example, can be used for open fieldbus interfaces, such as Profibus,

DeviceNet, etc.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 383 384

Brak uwag

Bosch PIN8 N1 Dokumentacja Strona 43