Bosch LTC 2604 Instrukcja Obsługi Pobierz pdf (Strona 16)

IntuiKey Series | Instruction Manual | Controlling Allegiant Series Video Switches

Bosch Security Systems | 28 June 2004

Contrast Adjust

Displays the Contrast Adjust menu which provides

two adjustment scales: one for the softkey display,

and one for the status display. Control each

adjustment scale with the adjacent softkey buttons

(as indicated by the arrows in the menu).

Generally, the buttons to the right of each scale

decrease the contrast (make the display lighter),

while the buttons to the left increase the contrast

(make the display darker). The indicator on the

scale is incremented (moved) one step for each

press of the softkey. The indicator wraps around

when either limit is reached. When the desired

contrast level is reached, press ENTER to exit the

submenu and store the values. Press CLR at any

time to reset the contrast to the presently stored

value. Pressing MON + CLR (simultaneously, at

any time while using the keyboard) resets the

contrast to the center position of the scale.

NOTE: It is possible to adjust the contrast to a level

where the text cannot be seen. If this happens, simply

continue pressing the softkey until the text reappears

OR press CLR to restore the display to the presently

stored values.

Key Click On/Off

Toggles between audible sound at each key click

and no sound at each click. Upon pressing the key,

the softkey descriptor indicates whether key click is

on or off.

Display Inverse

Toggles the display between black-on-white display

or white-on-black display. Upon pressing the key,

the softkey descriptor indicates whether display

inverse is on or off.

4CONTROLLING ALLEGIANT

SERIES VIDEO SWITCHERS

NOTE: This section applies to KBD-Universal Model

ONLY.

4.1 The Allegiant Main Control Menu

4.1.1 Accessing the Allegiant Main Control Menu

1. Press PROD to put the keyboard in Product Selection

Mode. The Product Selection menu appears in the

softkey display.

2. Press the Allegiant or ADIM softkey button, and

observe that the status display shows the Allegiant

mode.

3. While in Allegiant mode, keyboard operators can

use a convenient “Go Back” feature. To go back to

the previously selected camera, simply press and

hold the “CLR” key for more than 1 second.

FIGURE 4-1 Status Display in Allegiant Mode

IMPORTANT NOTE REGARDING USER LOG-ON:

Depending on the setting of the Allegiant Switcher, it

may be necessary to perform a log-on procedure to

gain control of the switcher (i.e. to gain access to the

Allegiant Main Control menu).

• If log-on information is required, the status

display requests a USER NUMBER. Enter

the number using the keypad, and press

ENTER.

• The status display requests a PASSWORD.

Enter the password using the keypad, and

press ENTER.

• If an invalid user number or password is

entered, the request for log-on is redisplayed.

•Following successful user log-on, the softkey

display shows the Allegiant Main Control menu

as in FIGURE 4-2.

• If user log-on is NOT required, the softkey

display shows USER LOGGED ON (briefly),

and then displays the Allegiant Main Control menu.

FIGURE 4-2 Allegiant Main Control Menu

User

Exit Log Off

Device Command

Lockout Script

Program Camera

Sequence Control

Alarm User

Control Functions

Load ADIM

Sequence Controls

Hold Start

Sequence Sequence

< Previous Next >

< Sequence Sequence >

< Step Step >

Monitor Camera

123 1234

Allegiant

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Komentarze do niniejszej Instrukcji

Brak uwag

Bosch LTC 2604 Instrukcja Obsługi Strona 16

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Bosch LTC 2604