Bosch SC8016 Przewodnik Instalacji Pobierz pdf (Strona 18)

SC9000

ST150 SAFECOM Central Station Operation Manual

(378). There are now two identical Radio Communicator accounts except for the Radio Communicator numbers. One

is Radio Communicator #214 (original), and the other is Radio Communicator #378 (new).

6. Press the ESC=EXIT option from the command window. The message “Save changes before exit? (depress ESC to

continue editing)” will be displayed.

7. Press “ Y “ to answer yes. The message “Saving data . . .” will be displayed in the operator prompt window. The

SC9000 computer will then attempt to poll the Radio Communicator 378, but it will be unable to communicate with it

because the Radio Communicator in the field is still programmed to respond only to calls for Radio Communicator

214. Therefore, the message “This remote has failed to respond to a poll or message” for the new Radio

Communicator number 378, will be displayed in the operator window.

8. It is now necessary to deactivate the original Radio Communicator account (214). Press the F1=SELECT option from

the command window. The message “Select a remote: 378” will be displayed. Enter the old Radio Communicator

number (214), that will be deactivated and press ENTER. The Radio Communicator Status display for the old Radio

Communicator number (214) will be displayed.

9. Press the F2=SETUP option from the command window. The Radio Communicator Account Setup Menu #1 for the

old Radio Communicator number, 214, will be displayed. Use the

↓

key to highlight the Framer parameter. Type “ 0 “

in the Framer field and press the ESC=EXIT option from the command window. The message “Save changes before

exit? (depress ESC to continue editing)” will be displayed.

10. Press “ Y “ to answer yes. The message “Saving data . . .” will be displayed in the operator prompt window, followed

immediately by the message “This remote does not exist” which will be displayed in the operator window for the old

Radio Communicator number, 214.

The following sequence of messages will be displayed in the record of events on the left hand side of the screen:

378 program complete

378 restart

378 startup 000022574

214 > INACTIVE 000022574

214 DEACTIVATED

11. It is now necessary to remove the old Radio Communicator account number from the SC9000 computer. Select the

F1=SELECT option from the command window. The message “Select a remote: 214” will be displayed. Press

ENTER. The message “This remote does not exist” will be displayed.

12. Select the F2=SETUP option from the command window. The Radio Communicator Account Setup Menu #1 for the

old Radio Communicator number, 214, will be displayed.

13. Select the F2=DELETE option from the command window. The message “Delete all parameters for this remote?” will

be displayed. Press “ Y “ to answer yes. The Radio Communicator Setup Menu #1 for the old Radio Communicator

number, 214, will be set to all zeroes (000).

14. Select the ESC=Exit option from the command window. The message “Save changes before exit? (depress ESC to

continue editing)” will be displayed. Press “ Y “ to answer yes. The message “Saving data . . .” will be displayed and

followed by the message “This remote does not exist” for the old Radio Communicator number, 214.

The Radio Communicator account number 214 is now deleted from the SAFECOM SC9000 and can be used to set up a

new account when desired.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Komentarze do niniejszej Instrukcji

Brak uwag

Bosch SC8016 Przewodnik Instalacji Strona 18

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Bosch SC8016