Bosch Solution 144 Podręcznik Użytkownika Pobierz pdf (Strona 33)

33Bosch Security Systems 04/12 BLCC600U

Solution 144 User Guide

Trigger Table 1 Phone 1

+61423474345

Press

 0-9 OK to SAVE

3. Use the [] and [] keys to scroll the cursor left and

right across the phone number. Use the [] and []

keys to change the individual digit in the number or

press the [OFF] key to clear the whole number and

then enter the new number using the 0-9 keys

4. Press [OK] to save and exit, or press [MENU] to exit

without saving.

Note

Your phone must be set to send the caller line

identication (CLI) information or the trigger

function will not work.

Devices > GSM/GPRS Module >

Trigger Table 2

MENU 6-5-6

This menu allows you to program a list of up to 10 phone

numbers which can be used to remotely operate one or

more outputs on the system which have been congured

by your installer.

When the GSM phone is ringing, the system will check if the

incomming call is from a number which has been entered

into the trigger table and if the numbers match then any

outputs programmed to operate by numbers in trigger

table 2 will operate.

Enter programming mode (PIN + MENU) then,

1. Enter [MENU] + [6] + [5] + [6].

A list of programmed phone numbers will be

displayed.

Phone 1= +61413763486

Phone 2= +61423874624

Phone 3=

Press

 OK to SAVE

2. Use the [] and [] keys to select the phone number

to add or change, then press [OK] to select.

The keypad will display the following:

Trigger Table 2 Phone 1

+61413763486

Press

 0-9 OK to SAVE

3. Use the [] and [] keys to scroll the cursor left and

right across the phone number. Use the [] and []

keys to change the individual digit in the number or

press the [OFF] key to clear the whole number and

then enter the new number using the 0-9 keys.

4. Press [OK] to save and exit, or press [MENU] to exit

without saving.

Note

You must enter the full phone number including the

area code and or country code or the trigger table

will not work. To check the number sent by your

phone call another phone and check the caller ID

received.

Devices > GSM/GPRS Module >

SMS Control

MENU 6-5-7

If your system has the optional GSM module tted various

commands can be sent to your system via SMS text

messages.

This menu allows you to select the phone or phones which

can send these messages to your system. If no numbers

are programmed in this location then SMS commands can

not be sent to your system.

Up to 10 phone numbers can be programmed to allow

SMS comands to be sent the GSM module.

Enter programming mode (PIN + MENU) then,

1. Enter [MENU] + [6] + [5] + [7].

A list of programmed phone numbers will display on

the keypad.

Phone 1= +61423474345

Phone 2= 0296438451

Phone 3=

Press

 OK to SAVE

2. Use the [] and [] keys to select the phone number

to add or change, then press [OK] to select. The

keypad will display the following:

SMS Control Phone 1

+61423474345

Press

 0-9 OK to SAVE

3. Use the [] and [] keys to scroll the cursor left and

right across the phone number. Use the [] and []

keys to change the individual digit in the number or

press the [OFF] key to clear the whole number and

then enter the new number using the 0-9 keys

4. Press [OK] to save and exit, or press [MENU] to exit

without saving.

Note

Your phone must be set to send the caller line

identication (CLI) information or the SMS

restriction function will not work.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Komentarze do niniejszej Instrukcji

Brak uwag

Bosch Solution 144 Podręcznik Użytkownika Strona 33

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Bosch Solution 144