
RAID Subsystem DVA-08K and DVA-16K | Quick Installation Guide Connecting a Digital Video Recorder | en 19
Bosch Security Systems F.01U.027.800 | V1 | 2006.05
12 Connecting a Digital Video Recorder
These instructions explain how to connect to the following Digital Video Recorders (DVR):
• DiBos 8
• Divar
• VIDOS NVR
12.1 Connecting a DiBos 8
The following hardware is required to connect a DiBos:
• If you have not ordered a DiBos 8:
Include DB EK 021 in your order. The DiBos 8 is delivered with an pre-installed SCSI host
bus adapter and a 3 m (10 ft.) SCSI cable.
• If you already have a DiBos 8, but without a SCSI host bus adapter:
You must order DB EK 061. The upgrade kit includes a SCSI host bus adapter and a 3 m
(10 ft.) SCSI cable for field upgrade.
• If you already have a DiBos 8 with installed host bus adapter, but no SCSI cable is avail-
able:
Order the DVA-ACON-HD68A cable.
• If you want to expand an existing system (DiBos and subsystem) with an additional sub-
system:
Order the DVA-ACON-VD680A cable (0.5 m/20 in.) or DVA-ACON-VD68A cable (1 m/
40 in.).
To connect the DiBos 8:
1. Connect DiBos 8 with the subsystem. Note, switch the DiBos 8 and subsystem off.
Take care of proper connection and tighten the screws of the plug.
Fig. 12.1 Connecting DiBos 8
2. For daisy chaining several subsystems, you must switch off the termination of channel
CH0/1-OUT of all subsystems except the last.
i
NOTICE!
• Two and more subsystems: Make the SCSI connection after you have changed the SCSI
ID of the second and the further subsystems.
• Due to SCSI 3 specifications, we do not recommend to daisy chain more than three sub-
systems (cable length: maximum 12 m (39.4 ft.).
1 DiBos 5 CH0-OUT
2 RAID subsystem(s) 6 DVA-ACON-HD68A or cable supplied
with DiBos
3 SCSI port 7 DVA-ACON-VD68A or
DVA-ACON-VD680A
(SCSI connection)
4 CH0-IN
Komentarze do niniejszej Instrukcji