Bosch DVR-16K Przewodnik Instalacji Pobierz pdf (Strona 8)

8 en | Installation Procedures RAID Subsystem DVA-08K and DVA-16K | Quick Installation Guide

F.01U.027.800 | V1 | 2006.05 Bosch Security Systems

3 Installation Procedures

To install the subsystem use the following steps:

1. Unpack the Subsystem (see Section 4 Unpacking the Subsystem)

2. Install the system in the rack (see Section 5 Rack Mounting)

3. Install the Drive Tray (see Section 6 Drive Tray Installation)

4. Connect the Subsystem Cable (see Section 7 Subsystem Cable Connections)

5. Power On (see Section 8 Power On)

6. Configure the Host Computer (see Section 9 Configuring the Host Computer via a Network)

7. Change the IP Address (see Section 10.1 Changing an IP Address)

8. Change the factory default settings (see Section 10.2 Guidelines for Setting Up a RAID)

9. Connect the DVR (see Section 12 Connecting a Digital Video Recorder)

4 Unpacking the Subsystem

Check the included Unpacking Checklist and verify the model name and shipping contents

against the checklist.

5 Rack Mounting

Slide rails are required for rack mounting. For rack mounting use only one of the following

slide rail kits:

DVA-08E and DVA-08K DVA-16K

Slide rails for 533 mm to

724 mm deep racks

(21" to 28.5")

DVA-ASRK-28A --

Slide rails for 647 mm to

914 mm deep racks

(25.5" to 36")

DVA-ASRK-36A --

Slide rails for 610 mm to

813 mm deep rack

(24" to 32")

-- DVA-ASK-32A

Slide rails for 660 mm to

914 mm deep rack

(26" to 36")

-- DVA-ASK-35A

Table 5.1 Slide rail kits

NOTICE!

Refer to Slide Rail Kit Installation Manual for detailed information.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 29 30

Brak uwag

Bosch DVR-16K Przewodnik Instalacji Strona 8