Bosch PCH615CAU Instrukcje Operacyjne Pobierz pdf (Strona 13)

Burner ignition &

control

Depress control knob and turn anti-clockwise to “High

flame”position. Hold the knob down for a few seconds

intensity.

shuts off the gas supply if the flame extinguishes for

any reason. To re-ignite, wait 30 seconds for any unburnt

gas to disperse before repeating the ignition procedure

described above.

To turn off the gas supply to a burner turn the control

burner.

“Low flame” graphic= lowest output

Burner

Position

Graphic

Operating instructions

knob clockwise to the “OFF” position. (Refer Fig. )

If ignition fails depress knob and try again. If flame is

Turn anti-clockwise to set the flame to the desired

not established in 15 seconds release the control

knob and open a door and wait 1 minute before

attempting a new ignition procedure.

If the ignition sparkers are dirty, this makes the burners

harder to light, so you should keep them as clean

“High flame” graphic= higest output

as possible. Clean them using a small brush and

The control knob is used to adjust the flame of the gas

remember that the ignition sparkers must be treated

very gently.

Burner locations

depressed for a few seconds to activate

it.

ignition fails, depress knob again and wait for

ignition.

If your hotplate is equipped

with flame failure device, keep control knob

flame failure device

1. Medium burner

until the flame ignites.

2. Medium burner

3. Wok burner

4. Small burner

5. Control burner

6. Large burner

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

Komentarze do niniejszej Instrukcji

Brak uwag

Bosch PCH615CAU Instrukcje Operacyjne Strona 13

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Płyty grzewcze Bosch PCH615CAU