Bosch CC488 Dokumentacja Pobierz pdf (Strona 20)

CC484/CC486/CC488 | Operators Manual | 22. Glossary of Terms EN | 20

Bosch Security Systems | 6/04 | 4998152445B

22. Glossary of Terms

Table 16: Glossary of Terms

Term Description

Alarm Condition Occurs when your alarm system is armed and one of the detection devices is

violated. A 24-hour zone (such as a smoke detector) can activate an alarm condition

when your system is armed or disarmed.

Answering Machine

Bypass

Make a connection with the system for remote arming operations when there is an

answering machine or facsimile machine on the same telephone line.

Area Codepad Use if the system is partitioned into two separate areas. All operations at the area

codepad do not affect the other area.

Armed The system is ready to accept alarms.

Automatic Arming Use to automatically arm the system at the same time every day in AWAY Mode or

STAY Mode 1.

Automatic Disarming Use to automatically disarm the system at the same time every day.

AWAY Mode This is the mode used to arm your system when you leave your premises.

Codepad Use to arm/disarm the system and carry out other functions such as adding and

deleting system user codes.

Day Alarm Monitor a combination of zones while the system is disarmed.

Detectors Devices connected to your alarm system used to detect intrusion and cause an

alarm condition. Some detection devices include, Passive Infrared (PIR), smoke

detectors, photoelectric beams, reed switches, and vibration sensors.

Disarmed A state in which your system does not accept alarms except on zones programmed

for 24-hour operation.

Dynamic Battery

Testing

Use to monitor and test the condition of your back-up battery.

Entry Time/

Entry Delay

Time allowed after entering your premises by a zone programmed for delayed

operation so you can disarm the system.

External Equipment Any device connected to your system, such as detectors, codepads, and sirens.

Forced Arming Permits your alarm system to be armed when one or more zones are unsealed.

Handover Delay Hands over the remaining delay time to a zone programmed as handover when your

system is armed and a zone programmed for delay has been violated. The handover

zone does not activate an alarm until the remaining delay time expires. A handover

zone acts as an instant zone if violated before the delay zone.

Hand Held Remote

Control

Use to remotely operate your system by hand held transmitters.

Isolating Manually disable (isolate) one or more zones before arming the system.

Master Code Numerical code used for arming and disarming the system, as well as allowing

access to functions (such as adding and deleting user codes).

Master Partitioned

Codepad

Used only if your system is partitioned (CC488 only). The codepad allows you to

view and operate both areas from the same codepad.

Monitoring Station Secure location where a digital receiver monitors numerous alarm systems and

deciphers their Alarm Transmission Reports. The operator can then advise the

appropriate authorities to take immediate action.

Panic Alarm Indicates to the monitoring station there is an emergency situation at your premises.

Sealed Refers to zone status. If a zone is sealed, the detection device is not violated and

the zone indicator does not display on the codepad.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Komentarze do niniejszej Instrukcji

Brak uwag

Bosch CC488 Dokumentacja Strona 20

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Bosch CC488