Galaxy Interface Manual for Bosch G-series Alarm Panels
Page 14 of 39
2.3 Setting the Alarm Options
Workstat0ion alarm options determine how the Workstation behaves when SG Alarm Events occur for
acknowledgeable alarms. An acknowledgeable alarm is defined as a detected event from an Alarm Panel point
that is armed and active and also has been configured to require acknowledgement. An Alarm Panel point is
configured to require acknowledgement by enabling the acknowledge option in the SG point programming screen.
1. Click/select the Alarm Options tab in the System Settings screen and set/verify each option is set
as needed. The table below is an abbreviated list of the pertinent workstation alarm options. The
remaining alarm options are discussed in full in the main SG7 Software Manual - Chapter 15.
2. Click OK and APPLY to save changes. You will need to restart the software to initialize changes.
Option Description
Pop up on Alarm (default to checked/on) When checked, System Galaxy pops the SG Alarm Event screen to
the front when an acknowledgeable event is detected.
Automatically call
up DVR Video
(default to checked/on) – allows DVR Viewer to start when alarm event occurs.
When checked, System Galaxy starts the GCS DVR Viewer window if a dvr/camera is
linked to the alarm point. The DVR Viewer shows live video for the camera that is linked to
the activated alarm panel point.
Prevent Appl.
Shutdown w/
Pending Alarms
(default to checked/on) When checked, operator is unable to close the System Galaxy
when a “pending” (unacknowledged) alarm is active in SG Alarm Event screen.
Allow
Acknowledge all
alarms
(default to checked/on) – acknowledge all command clears the alarm events.
When checked, the operator can select the ‘acknowledge all’ option from the command
menu (shortcut menu) in the SG Alarm Event screen.
Acknowledge
alarm priority
range
(Defaults to 0 -9999) - allows client to set the range for acknowledgeable alarm events on a
per workstation basis. (acknowledgeable = alarm point set to ‘ack’)
Acknowledgeable alarms outside of the specified range will not trigger an SG Alarm
Event at the local workstation.
Acknowledgeable alarms inside the range will display on the SG Alarm Event screen for
the local workstation.
Force response
above
(Defaults to 0) - allows client to define the threshold for alarm response based on priority.
(acknowledgeable = alarm point set to ‘ack’)
Acknowledgeable alarms with priorities below this value will not force a response from
the operator.
Acknowledgeable alarms above this value will require a response from the operator
before alarm event will be cleared from the screen.
NOTE: the Alarm Panel Point must be set to require acknowledgement (checked) in the Point Property
screen. Also the alarm priority
set in the Alarm Point Property screen must be within the
acknowledgeable alarm priority range defined in the Workstation/Alarm Options screen.
Workstation Options screen – Alarm Options tab (cropped)
(108 strony)
(10 strony)
(6 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji