Bosch NDN-921 Instrukcja Użytkownika Pobierz pdf (Strona 35)

FlexiDomeHD 720p Camera Installation | en 35

Bosch Security Systems Installation and Operation Manual AR18-10-B013 | v1.52 | 2010.12

5.6 Closing the unit

When the camera position is set and all adjustments have been

made, close the unit.

1. If necessary, remove the adjustment cap from the lens.

2. Place the inner liner in position aligning its fin with the

bracket on the base.

3. Place the dome onto the base and rotate until it clips into

place. (If necessary, clean its surface with a soft cloth.)

4. Place the sealing ring and the trim ring over the dome.

5. Align the tamper-resistant screws in the trim ring with the

threaded ends in the mounting base.

6. Use the supplied special screwdriver bit to tighten the

three tamper-resistant screws.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 131 132

Brak uwag

Bosch NDN-921 Instrukcja Użytkownika Strona 35