Bosch TOURING 7500 SERIES Instrukcja Operatora Strona 83

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 82
To add a Bosch VMS workstation:
1. Right-click and click Add Workstation.
The Add Workstation dialog box is displayed.
2. Enter the appropriate value click OK.
The workstation
is added to your system.
To add an analog monitor group:
1.
Expand
, right-click and click Add Monitor Group.
The Create New Analog Monitor Group dialog box is displayed.
If you already have performed a network scan, and decoders have been detected, there is
already a default analog monitor group available with all detected decoders assigned.
2. Make the appropriate settings.
3. Click OK.
The analog monitor group is added to your system.
To add a communication device:
1. Expand
, right-click and click the required command.
The appropriate dialog box is displayed.
2. Enter the appropriate settings.
3. Click OK.
The communication device is added to your system.
To add a peripheral device:
1. Expand , right-click and click the required command.
The appropriate dialog box is displayed.
2. Enter the appropriate settings.
3. Click OK.
The peripheral device is added to your system.
To add a virtual input:
1. Expand , click .
The corresponding page is displayed.
2. Click Add Inputs.
A row is added to the table.
3. Make the appropriate settings.
4. Click Add .
The virtual input is added to your system.
To add a network monitoring device:
1. Expand
, right-click and click Add SNMP.
The Add SNMP dialog box is displayed.
2. Type a name for the SNMP device.
The network monitoring device is added to your system.
To add a CCTV keyboard:
Note: For adding a keyboard you must have added a workstation.
Bosch Video Management System
Managing various devices | en 83
Bosch Sicherheitssysteme GmbH Configuration Manual 2013.07 | V1 | Configuration Client
Przeglądanie stron 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 259 260

Komentarze do niniejszej Instrukcji

Brak uwag