Bosch SF8172V Dokumentacja Pobierz pdf (Strona 175)

Vivotek Corp.

38-

Special Points

1 It is recommended when the camera is added to the NVR, That no property parameters

are changed on the camera web GUI (unless specified on the release notes)

2 Fo

r the following camera models FE8171/FE8172, PZ81x1 or any other model supporting

mic and line in - Internal or external microphone must be selected on the device or via

camera web client respectively before camera is added to the NVR. The volume controls

on the NVR control the external mic, the internal mic can be changed on the camera web

client.

3 Wide

Dynamic range values are:

FD8135H 0 = off, 1 = on

FE8171, FE8172, IP8362 0 = off, 1 = low, 2 = high

SD8313E, SD8362E 0 = off, 1 = manual, 2 = auto

4 V

ivotek cameras / encoders support three different ways to set / get video quality, and

keep the quality value of each way. However, at any time only one of them is taking effect.

Every time a new way is used to set quality value, this way will take effect with other two

stand by, i.e. the last used way will block values of other two ways from taking effect on

video (though they still can be got from camera).The way handler uses is called

"percentage mode" by Vivotek. Its valid values range from 1 to 100. And camera webGUI

uses the other two ways.

5 V

ivotek handler enumerates the same bitrate range as camera webGUI does. But custom

value is not supported.

6 V

ivotek handler support s H.264 profile setting, which is not available on camera webGUI.

7 T

he Vivotek handler caches the mount type for the fisheye models. Users should NOT

change mount type via camera webGUI, or dewarping may not work properly.

1 2 ... 170 171 172 173 174 175

Brak uwag

Bosch SF8172V Dokumentacja Strona 175