Bosch SF8172V Dokumentacja Pobierz pdf (Strona 96)

AXIS Communications

28-9

P5522 If an Axis P5522 PTZ camera is not receiving sufficient power for

its PTZ operations then it will disable the PTZ motor and remove

the PTZ.Limits and PTZ.Support parameter groups from the

camera parameter list. As a consequence, no PTZ controls will

be available in the NVR web client and Victor Client for that

camera. The symptom may also occur when other PTZ camera

models receive insufficient power.

Q1910,Q1921 The default palette setting of an Axis Q1910 or Q1921 thermal

camera can only be changed by using the camera’s web

interface “Setup -> Video & Audio -> VideoStream -> Image

Appearance.Palette”. Changing the default palette has no effect

on established streams. The NVR uses whatever the default

palette is when the stream is established. After the customer

changes the default palette then it is necessary to destroy and

recreate the stream received by the NVR. The stream can be

destroyed and recreated by simply using the NVR web client to

change the video frame rate.

M5013, M5014 The Axis M5013 and M5014 have a single speed PTZ movement

therefore the camera PTZ movement is affected only by the

interval between the start and stop commands from Victor Client,

not the speed values in the start command. The consequence is

that PTZ movements may be larger than desired. Refer to QC

9770 for more details.

P8221 1 When added to the NVR the device cannot be seen on

the video list as it does not support video stream. The

user must go to the audio list to see the device listed

2 When added to NVR, the firmware for this device

displays as “UNSUPPORTED” until the audio device is

enabled. Use the following steps to do this:

a Add camera to NVR

b Select “Audio List” tab

c Select edit icon

d Select “Enable” from drop down menu

e Save

3 When the P8221 is added to the NVR but is offline, the

settings can still be accessed but will appear as

“unsupported”]

4 As Video Edge 4.4 dry contact is only associated with

video, P8221 Audio I/O module dry contact cannot be

used as this device does not support video stream.

5 As Video Edge 4.4 PTZ is associated with video, P8221

PTZ feature cannot be used as this device does not

support video stream.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 174 175

Komentarze do niniejszej Instrukcji

Brak uwag

Bosch SF8172V Dokumentacja Strona 96

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Bosch SF8172V