Bosch ISW-BIT1-HAX WLSN INSTALLATION Dokumentacja Pobierz pdf (Strona 23)

wLSN | Reference Guide | 4.0 wLSN Hub

Bosch Security Systems, Inc. | 3/07 | F01U009440-01 23

4.0 wLSN Hub

(ISW-BHB1-WXA, ISW-BHB1-WXB, ISW-BHB1-WXC)

The wLSN Hub monitors and coordinates two-way communications

between the control panel and the detectors. Features include:

• Three switches, S1, S2 and S3, for configuring device

operation and enabling special diagnostic or installation modes

• An LED for visual device status

Table 8: wLSN Hub Specifications

Wire Gauge 0.14 (24 AWG) to 1.5 mm (18 AWG).

Power/Voltage 12 VDC nominal, 7 to 14 VDC

Wire Length ≤300 m (1000 ft)

Current Draw maximum 60 mA

Wall and Cover

Tamper Switch

Transmits a tamper signal when the detector is

removed from its base or pulled away from the wall.

EN50131-1 Security Grade 2, Environmental Class II

For more information on wire distance and the number of

devices, refer to the control panel’s documentation.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

Brak uwag

Bosch ISW-BIT1-HAX WLSN INSTALLATION Dokumentacja Strona 23