Bosch ISW-BIT1-HAX WLSN INSTALLATION Dokumentacja Pobierz pdf (Strona 44)

wLSN | Reference Guide | 13.0 wLSN Smoke Detector

44 Bosch Security Systems, Inc. | 3/07 | F01U009440-01

Figure 15: wLSN Smoke Detector

1 2

1 - High intensity LED

2 - Test/Silence Button

13.1 Battery Replacement

The LED normally flashes every 8 sec. Replace batteries when the

LED stops flashing and the sensor chirps every 45 sec.

The low battery trouble chirps can be silenced for 24 hours by

pushing the Test/Silence Button. Refer to Figure 15 on page 44 for

the location of the Test/Silence Button.

13.2 Smoke Test

Test smoke detectors annually using a listed aerosol smoke tester

to simulate an alarm. Follow the instructions on the can.

The LED should remain on while the detector provides a

continuous tone. The detector automatically resets when smoke is

no longer present. A detector that fails to activate with the Smoke

test might require cleaning or replacement.

To avoid a fire department dispatch, contact the central

monitoring station or put the system into Test mode before

activating the detector using this method.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 59 60

Brak uwag

Bosch ISW-BIT1-HAX WLSN INSTALLATION Dokumentacja Strona 44