Bosch K2200 Series Przewodnik Instalacji Pobierz pdf (Strona 39)

K2200 Series | Installation Guide | 5.0 Installation Details EN | 39

Bosch Security Systems | 7/03 | 17375 1.3 / 46513C

5.5.4 Alarm Event Manager

An Alarm Event Manager (AEM) can be connected to the reader channel of any of the door controllers.

Figure 26: AEM Cable Distances

Max Distance: 1000 m (3000 ft.)

Max Distance:

500 m (1500 ft.)

1 - Door Controller

2 - Alarm Event Manager

3 - Reader

4 - 8 Supervised Inputs

5 -- 8 Outputs

Inputs

There are 8 supervised inputs available on the AEM.

The detectors may be either Normally Closed or

Normally Open. The type of detector is set using the

switch bank on the left of the circuit board, below the

tamper switch.

For more details, refer to the documentation supplied

with the AEM.

5.5.5 26-bit Wiegand Readers

Most 26-bit Wiegand readers with open collector D0,

D1 can be connected to a Readykey K2200 Series

Door Controller as shown in Figure 27 and Figure 28.

Note that an interface kit is not required.

Figure 27: Wiegand Connections – 18 V

Figure 28: Wiegan Connections – 12 – 30 V

This is for caption text

5.5.6 Magstripe Readers

Magstripe readers with open collector CLK, DATA

can be connected to a Readykey

K2200 Series Door

Controller as shown in Figure 29. Note that an

interface kit is not required.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 59 60

Brak uwag

Bosch K2200 Series Przewodnik Instalacji Strona 39