Bosch DS7445i Podręcznik Użytkownika Strona 42
- Strona / 54
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Page 42 P/N: 49211C © 2002 Detection Systems, Inc. All rights reserved. DS7240/DS7220 User's Guide
PART II: KEYPAD USER’S GUIDE: DS7445i LED KEYPAD
5.24 Walk Test
I can perform this function.
I cannot perform this function.
Key Sequence: [#] + [4] + [4]
Description
Use this function to walk-test detection devices
connected to your system. Perform the Walk Test on
a weekly basis. Your Security Company configures
the types of devices that can be walk-tested.
Procedure
1. Make sure that the system is turned off (Armed
LED is off).
2. Enter a valid user PIN.
3. Enter [#] + [4] + [4]. The keypad emits a single
tone.
4. To test each zone, trigger the corresponding
detection device (open a door, walk in front of a
motion detector, etc.) until all zones have been
tested. When a zone is tested, the keypad emits
a single one-second tone and the corresponding
zone LED turns on. When the tested zone is
restored, the keypad emits a second single one-
second tone and the corresponding zone LED
turns off.
5. To exit the Walk Test function, press the [#] key.
The Status LED flashes rapidly. Walk Test is over
when the Status LED stops flashing.
Test fire detection devices (smoke/heat
detectors) weekly as instructed by your
Security Company and in accordance with the
devices’ instructions.
5.25 Reset the System
I can perform this function.
I cannot perform this function.
Key Sequence: [System Reset] or [#] + [4] + [7]
Description
Use this function to reset the system (including fire
zones) after an alarm. Detection devices, such as
smoke detectors and shock sensors, must be reset
after being activated. Resetting the system takes
about 20 seconds.
If zones do not reset, contact your Security Company
for help.
Procedure
1. Make sure that the system is turned off (Alarm
LED is off).
2. Enter a valid user PIN.
3. Press the [System Reset] key or enter [#] +[4] +
[7].
The system now resets. After the system resets,
the keypad automatically exits this function.
5.26 Turn Chime On/Off
I can perform this function.
I cannot perform this function.
Key Sequence: [#] + [6] + [1]
Description
Use the Chime feature to “chime” zones when the
system is off. For example, parents with small
children may want a tone to sound whenever a door
or window is opened as a way of monitoring the
location of the children.
Use this function to turn the Chime feature on and off.
Once you have programmed the system with zones to
watch and the responses (see “Select Chime Tone”
on page 43 and “Select Chime Zones” on page 43),
you need to turn the Chime function on or off.
Procedure
1. Make sure that the system is turned off (Armed
LED is off).
2. Enter a valid user PIN.
3. Enter [#] + [6] + [1].
The keypad beeps for one second to indicate that
the Chime feature is now on or off, depending on
the applied setting.
• If Chime is on, the Zone 2 LED flashes (press
[2] to turn off).
• If Chime is off, the Zone 1 LED flashes (press
[1] to turn on).
On
Status
Power
Fire
Supervisory
Bell Silenced
Trouble
TEST WEEKLY
7 8
9 10
11 12 13
14 15
16
Armed Perimeter
Flashing Status LED
1 2 3 4 5 6
Flashing Zone 1 LED: Chime is off
(Zone 2 LED is on).
On
Status
Power
Fire
Supervisory
Bell Silenced
Trouble
TEST WEEKLY
7 8
9 10 11 12 13
14 15
16
Armed Perimeter
Flashing Status LED
1 2 3 4 5 6
Flashing Zone 2 LED: Chime is on
(Zone 1 LED is on).
- User’s Guide for the 1
- MY ALARM COMPANY IS: 2
- Contents 3
- Part I: Introduction 4
- 3.0 Keypad Overview 5
- 3.2 Keypad Tones 6
- 3.3 Keypad LED Functions 6
- 3.4 Function Key Sequences 7
- 3.5 System Events 7
- 3.8 Logging Out of the System 7
- Part II: Keypad User’s Guide 8
- 4.7 Set Partial On Zones 10
- 4.10 Force Arming the System 12
- 4.11 View Faulted Zones 13
- 4.12 Bypass Zones 13
- 4.13 Date and Time 14
- 4.14 Change PIN 14
- 4.15 Change Others’ PINs 15
- 4.17 Add a PIN 16
- 4.18 Delete a PIN 17
- 4.19 Renew One-Time PINs 17
- 4.20 Check System Troubles 18
- 4.21 View Alarm Memory 18
- 4.22 View System Trouble 19
- 4.23 View Zone Trouble 19
- 4.24 System Test 19
- 4.25 Walk Test 20
- 4.26 Reset the System 21
- 4.27 Turn Chime On/Off 21
- 4.28 Select Chime Tone 21
- 4.29 Select Chime Zones 22
- 4.30 Extend Auto-On Time 22
- 4.31 Change Skeds 22
- 4.32 Change Outputs 25
- 4.33 Remote Program 26
- 4.34 All Areas Off 26
- 4.35 All Areas On 26
- 4.36 Move to Area 27
- 4.37 Auto-Forward On Setup 27
- 4.38 Auto-Forward Off Setup 28
- 4.39 Auto-Forward On/Off 28
- 4.41 View Log 29
- 5.1 Silence Alarms 30
- 5.2 Keypad Adjust 30
- 5.3 Turn the System Off 30
- 5.4 Turn the System All On 31
- 5.7 Set Partial On Zones 32
- Flashing Armed LED 33
- 5.10 Force Arming the System 34
- 5.11 Bypass Zones 35
- 5.12 Date and Time 35
- I can perform this function 36
- 5.17 Delete a PIN 39
- 5.18 Renew One-Time PINs 39
- 5.19 Check System Troubles 40
- 5.20 View Alarm Memory 40
- 5.21 View System Trouble 40
- 5.22 View Zone Trouble 41
- 5.23 System Test 41
- 5.24 Walk Test 42
- 5.25 Reset the System 42
- 5.26 Turn Chime On/Off 42
- 5.29 Extend Auto On Time 44
- 5.30 All Areas On 44
- 5.31 All Areas Off 44
- 5.32 Auto Forward On/Off 44
- 5.34 Remote Program 45
- Part III: Reference Materials 46
- 7.0 Panel Event Descriptions 47
- 10.0 Maintenance and Service 52
- 11.0 Power Failure 52
- 12.0 How to Clean the Keypad 52
- 13.0 Glossary 53
- Detection Systems, Inc. 6/02 54
- P/N: 49211C Page 54 of 54 54
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Bosch DS7445i
(175 strony)
(44 strony)
(8 strony)
(64 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.036 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji