Bosch D1260 Series Przewodnik Instalacji Pobierz pdf (Strona 10)

D1260

Overview

D1260 Installation Guide

2.3 Internal Features

To access the inside of the D1260, the back cover must be removed. Using a small flat-blade screwdriver, gently push in

the two holes in the bottom of the D1260. As the tabs are pushed in, lift the back plate away from the rest of the unit.

The following internal features are

found:

1. DIP Switch

(6-position) - allows

you to select the

address of each

command center,

and enable/ disable

the keypad encoding

tone. (See Section 3.2

Setting the DIP

Switch on page 12)

2. EEPROM socket

(with example

EEPROM installed)

3. Wall Tamper Switch

(See Section 3.3

Tamper Switch on

page 12)

Figure 5: D1260 with cover removed

4. SDI Connector Jack

5. Volume Control Potentiometer (See Section 3.4 Volume Control on page 12)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Brak uwag

Bosch D1260 Series Przewodnik Instalacji Strona 10