
D1260
Overview
D1260 Installation Guide
© 2003 Bosch Security Systems Page 7 48101D
2.0 D1260 Overview
Control/Communicator Upgrade Kit
D9412G or D9412 D9499-0640 or higher
D9112 D9199-0640 or higher
D7412G or D7412 D7499-0640 or higher
D7212 D7299-0640 or higher
The D1260 Command Center is a SDI Bus compatible
device used with the D9412G, D7412G, D7212G, D9412,
D7412, D7212, and D9112 Control/Communicators with
versions 6.40 or higher. If you need to upgrade your
control panel, you may order the following upgrade kit at
no charge (see Table 3).
The D1260 features a keypad that illuminates when you
press the keys, a 4-line by 20-character display, and a built-
in speaker that emits several distinct warning tones.
Table 3: Upgrade Kits
The panel supplies all power and data requirements for the D1260 via a 4-wire connection. For specific panel
compatibility refer to the Panel Compatibility Chart in the Specifications Section of this document. See the Current
Rating Chart for Standby Battery Calculations provided in the Operation and Installation Manual for the specific panel
used with the D1260 to determine if you need an additional power supply.
You can program the panel to generate messages to a central station receiver identifying the supervised command center
that is in trouble. To supervise a command center, program CC# Number Supervised to Yes (see the Program Entry Guide
specific to your panel). If a command center loses communication with the panel for more than 10 to 15 seconds, the
command center buzzes and “Call for Service” and “Contact us at:” displays. Other command centers
connected to the system will display “Service Keypad”. The panel transmits a serial device trouble report (SDI
FAILURE in Modem, “TROUBLE ZN D” in BFSK) to the receiver.
The D1260 Command Center has the
following features on the front panel.
1. LCD Display (see Section 2.2.1
LCD Display on page 8)
2. Digital Keypad (see Section 2.2.2
LCD Display on page 8)
3. Soft Keys (see Section 2.2.3.1
Soft Keys on page 9)
4. Command Center Function
Keys (see Section 2.2.3
Command Center Function Keys
on page 9)
Figure 1: D1260 Front Panel
Komentarze do niniejszej Instrukcji