Bosch D1260 Series Przewodnik Instalacji Pobierz pdf (Strona 12)

D1260

Installation

D1260 Installation Guide

3.2 Setting the DIP Switch

To access the DIP switch, the back cover must be removed. Using a small flat-

blade screwdriver, gently push in the two holes in the bottom of the D1260. As

the tabs are pushed in, lift the back plate away from the rest of the unit.

Switches 1 through 3 assign the address for the specific command center.

123456

Figure 7: D1260 DIP Switch

Switch

Address # 1 2 3 4¹ 5* 6¹

1 ON ON ON ON ON ON

2 OFF ON ON ON ON ON

3 ON OFF ON ON ON ON

4 OFF OFF ON ON ON ON

5 ON ON OFF ON ON ON

6 OFF ON OFF ON ON ON

7 ON OFF OFF ON ON ON

8 OFF OFF OFF ON ON ON

¹ Always set this to the On position, * Encoding Tone On/Off

Note: Each D1260 Command Center

must be assigned to a unique

address. Supervising the

command center is

recommended. Switch 5 toggles

the encoding tone ON and

OFF. With the encoding tone

turned ON, the command

center will sound a beep every

time a key is pressed.

Always keep Switch 4 and 6

ON.

Table 7: D1260 DIP Switch Settings

3.3 Tamper Switch

The Tamper Switch, when activated, disconnects the SDI bus to that command

center. Regardless of whether the command center is supervised or not, the

command center’s tamper switch that had been activated will display “Call

for Service” and “Contact us at:”. To supervise command centers,

see CC# Supervised? in Command Center Assignments in the panel’s Program

Entry Guide.

The Tamper Switch is activated when the D1260 is pulled away from a flush surface.

3.4 Volume Control

The Volume Control Potentiometer is a screw adjustment to control

the volume of the keypad tones (See #5, Figure 5 on page 10). A flat-

blade screwdriver can be used to adjust it.

INCREASEDECREASE

Figure 8: Increasing/decreasing volume

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Komentarze do niniejszej Instrukcji

Brak uwag

Bosch D1260 Series Przewodnik Instalacji Strona 12

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Bosch D1260 Series