Bosch KGF Series Dokumentacja Pobierz pdf (Strona 12)

Pour water into the exhaust bottle.

Add water to the exhaust bottle

described below.

Drain po

Pol

Reference

line

level

(1)

UnIoad the exhaust bottle from the body.

Pull

the bottle outwards until

the

top

handle

can

grabbed

securely.

Lift

the bottle out of the autoclave using

this

handle.

(2)

Pour water into the bottle through the water

filling

port.

Fill

water to the reference line level.

LOW

level

Drain

valve

(3)

Check to make sure that the water level is at the

LOW

level (the

lowest water level).

too much water has been poured in, then place the bottle in a

level sink with the side of the water filling and drain ports facing

downwards. Any excessive water is drained automatically until

the water level is lowered to the

LOW

level.

(4)

Check to see that the drain valve, located at the bottom of the

exhaust bottle housing

area,

is closed.

(5)

Load

the

bottle into the area.

Be sure to push the bottle to the end, or else

error

(

)

will

occur.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 45 46

Komentarze do niniejszej Instrukcji

Brak uwag

Bosch KGF Series Dokumentacja Strona 12

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie Bosch KGF Series