Bosch AMAX panel 4000 EN Przewodnik Instalacji Pobierz pdf (Strona 32)

Settings

This chapter specifies the properties and the behavior of the AMAX panel 4000.

Communication and Reporting

This section outlines the programming information required for the AMAX panel 4000 / AMAX

panel 4000 EN when communicating with a base station receiver. These parameters specify

the telephone numbers/IP address to be called, transmission formats and internet

communication options.

Receiver Telephone number /IP Address and Port

The control panel can report event information from four on-board dialers. The dialers report

to Receiver 1 to Receiver 4 by programming. You can program each dialer with 4 separate

telephone numbers/IP addresses and ports, reporting format type and subscriber ID number,

and internet communication options if necessary.

Example

You can set up Dialer 1 to report to receiver 1 in CFSK Format and set up Dialer 2, Dialer 3

and Dialer 4 to report to a base station receiver in Contact ID Format only if Dialer 1 is

unsuccessful.

To program a telephone number:

Each address in the telephone numbers stores one digit of the telephone number.

Insert a 15 at the end of a telephone number to indicate to the dialer that the end of the

telephone number is reached. The dialing sequence is terminated when a 15 appears.

Example

To program the telephone number 9672 1055 as the Telephone Number for Receiver 1,

program the following sequence into Address 000 - 016:

[9 6 7 2 1 0 5 5 15 x x x x x x x x] x stands for any digit. To enter a 4-sec pause in the dialing

sequence, program a 13. A pause might be necessary when the dialer communicates through

an old (slower) telephone exchange or when a PABX system is in place.

Example

To program the number 02 pause 9672 1055, enter:

[0 2 13 9 6 7 2 1 0 5 5 15 x x x x x].

The following table shows how to program the numbers, keys, and functions for a telephone

number.

Digit Required

Number to Program Digit Required Number to Program

0 0 8 8

1 1 9 9

2 2 * 11

3 3 # 12

4 4 4 sec pause 13

5 5 Terminal 15

6 6

7 7

Table 7.1: Dialing Digits

7.1

7.1.1

32 en | Settings

AMAX panel 4000 / AMAX panel 4000

2013.07 | 03 | F.01U.267.112 Installation Guide Bosch Sicherheitsysteme GmbH

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 175 176

Komentarze do niniejszej Instrukcji

Brak uwag

Bosch AMAX panel 4000 EN Przewodnik Instalacji Strona 32

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Bosch AMAX panel 4000 EN