Bosch DS7200V2-EXP Podręcznik Użytkownika Pobierz pdf (Strona 112)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 112

Bosch Security Systems | 8/04 | 4998153891C

Function, Output ##

• Address: See Table 24 on page 110

• Default:

− PO 1: 1|10 Alarm: Controlled and 24-hr Zones (Fire and Non-Fire)

− PO 2: 1|6 Strobe

− PO 3: 0|1 Armed: All, Perimeter Only, or Partial On

− PO 4: 2|13 Ready to Arm

− PO 5 to PO 20: 0|0 Disabled

• Selections: 0,0 to 8,15 (see Table 25)

This parameter assigns each output to a specific function. The function determines when the output activates. The

Mode, Time and Multiplier parameters, in combination with this Function parameter, determine when the output

deactivates.

All output functions can be reset using [#][5][4] except Alarm Outputs that follow Function Types 1|8 to 1|12 and

2|11, and those functions that can be reset by pressing [System Reset].

Table 25: Output Function Types

Digit 1 Digit 2 Function Type Description

0 0 Disabled

0 1 Armed – All, Perimeter Only, or

Partial On

Output activates when the system is armed All On, Perimeter Only, or

Partial On. For Steady or Pulse modes, the output remains activated until

the system is turned off.

0 2 Armed – Perimeter Only or

Partial On

Output activates when the system is armed Perimeter Only, or Partial On.

For Steady or Pulse modes, the output remains activated until the system

is turned off, or moved to another armed state.

0 3 Armed – All Output activates when the system is turned All On. For Steady or Pulse

modes, the output remains activated until the system is turned off, or

moved to another armed state.

0 4 Auto Arm Alert Output activates at the start of the Auto Arm Alert. For Steady or Pulse

modes, the output remains activated for the duration of the alert. See

Auto On Alert Time on page 26.

0 5 Exit Delay or Entry Delay Output activates at the start of Exit Delay or Entry Delay. For Steady or

Pulse modes, the output remains activated until entry or exit delay ends.

0 6 Exit Delay Output activates at the start of Exit Delay. For Steady or Pulse modes, the

output remains activated until exit delay ends.

0 7 Exit Delay Finished (until

disarmed)

Output activates at the end of Exit Delay. For Steady or Pulse modes, the

output remains activated until the system is disarmed.

0 8 Armed with Ack For systems programmed for closing reports, the output activates when

the acknowledgement for the closing report is received. For systems not

sending closing reports, the output activates at the end of Exit Delay. For

Steady or Pulse modes, the output remains activated until the system is

disarmed.

0 9 Entry Delay Output activates at the start of Entry Delay. For Steady or Pulse modes

the output remains activated until Entry Delay ends.

0 10 Entry Delay + Chime Output activates at the start of Entry Delay. For Steady or Pulse modes,

the output remains activated until entry delay ends. The output also

activates whenever a Chime zone is faulted. The output does not

activate on Chime if Chime Tone is turned off.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 155 156

Komentarze do niniejszej Instrukcji

Brak uwag

Bosch DS7200V2-EXP Podręcznik Użytkownika Strona 112

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Bosch DS7200V2-EXP