Bosch DS7200V2-EXP Podręcznik Użytkownika Pobierz pdf (Strona 121)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 121

Bosch Security Systems | 8/04 | 4998153891C

Assign (Area or Output), Sked #

• Address: See Table 29 on page 120

• Default: 0 (No Area or Output Assigned)

• Selections:

− 0 = No Area or Output Assigned (Sked disabled)

− 1 = Area 1 or Output 1

− 2 = Area 2 or Output 2

− 3 = Area 3 (DS7240V2 only) or Output 3

− 4 = Area 4 (DS7240V2 only) or Output 4

− 5 = Output 5

− 6 = Output 6

− 7 = Output 7

− 8 = Output 8

− 9 = Output 9

− 10 = Output 10

− 11 = Output 11

− 12 = Output 12

− 13 = Output 13 (DS7240V2 only)

− 14 = Output 14 (DS7240V2 only)

− 15 = Output 15 (DS7240V2 only)

Enter a zero (0) in this parameter to disable the Sked.

If the Sked Type is Auto On or Auto Off, this parameter assigns an Area to the Sked.

If the Sked Type is Output On or Output Off, this parameter assigns a programmable output. How the

programmable output functions at Sked time is determined in Output Parameters on page 107.

The output assigned to the Sked in this parameter can be any output. The Sked overrides that function at Sked

Time.

The Output On/Off Sked function is only available for Outputs 1 to 15 on the DS7240V2. On the

DS7220V2, it is only available for Outputs 1 to 12.

Time, Sked #

• Address: See Table 29 on page 120

• Default: 0000 (Sked disabled)

• Selections: 0 to 9

Enter the start time for the Sked. There are four digits in this entry, each one occupying an address.

Enter the time in 24-hour format (HHMM) where Midnight is 2400, noon is 1200 and 12:01 am is 0001.

Enter 0000 to disable the Sked.

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 155 156

Brak uwag

Bosch DS7200V2-EXP Podręcznik Użytkownika Strona 121