Bosch DS7200V2-EXP Podręcznik Użytkownika Pobierz pdf (Strona 9)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 9

Bosch Security Systems | 8/04 | 4998153891C

4.2 Panel Wide Parameters

4.2.1 Routing Destinations

The control panel has two routing destinations for the routing of reports. The control panel routes by zone and

report group to the destinations. For example, you can send alarm reports for one zone to Destination 1 and for

another zone to Destination 2.

You can program two phone numbers (or IP addresses) for each destination.

Communication Fail events are by destinations and not by phone number/IP address.

For a description of the routing/dialing process, see “Dialing Attempt Tables” in the DS7200V2 Installer’s Guide

(P/N: 4998153893).

Phone Number 1 (2) for Destination 1 (2))

• Address Range:

− Phone 1, Destination 1: 0000 to 0031

− Phone 2, Destination 1: 0032 to 0063

− Phone 1, Destination 2: 0066 to 0097

− Phone 2, Destination 2: 0098 to 0129

• Default: All zeroes (0)

• Selections: 0 to 14 (see Table 4)

Table 4: Phone Number Entry Selections

Digit to be Dialed Enter at Keypad Digit to be Dialed Enter at Keypad

1 1 9 9

2 2

0 10

3 3 * 11

4 4 # 12

5 5 P (4-sec pause) 13

6 6 F (on-hook, pause, off-hook) 14

7 7 Reserved 15

8 8

T (Terminate) 0

When entering phone numbers, enter “10” ([1][0] from the keypad) to dial “0”; enter “0” to terminate

the phone number. This does not apply when entering an IP address.

Terminate telephone numbers with less than 32 digits by entering a zero (0) in the Address after the

last digit to be dialed.

The control panel can dial up to 32 digits per phone number. Each digit occupies one address. If less than 32

digits are entered into the Phone Number Address range, the control panel dials digits until it reaches a terminator

(0).

IP addresses can be entered into these addresses for network communication. See Network Communication on page

129 for more information. Firmware revision 2.10 or greater is required for network communication.

See Area # Account Number on page 48 for instructions on entering an account number.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 155 156

Brak uwag

Bosch DS7200V2-EXP Podręcznik Użytkownika Strona 9